Not logged inAmerican Welding Society Forum
Hey Sam What Size Tires Do You Have On There?
i have 285/70/16 i cant go any taller on the back
how did you get 16 inch tires on there?Just asking?
it was my mistake they are 17" tires that is what the truck came with
Where in Tx are you located? I love to see that truck in person.
I think he said he lives in Mansfield,TX ... near Ft. Worth and Dallas area.
i live in mansfield,tx. it is just south of arlington.
WOW! Way too nice to put to work !
I like the extra touch of the boot dryer.
Do you have an cad drawing of it?
i dont have a cad on it. i just had it laid out in my head
very sharp bed would like to see some pics of layout inside boxes, also how many inches from king pin centerline to hoosier pole? I've got a problem of thinking i need to carry a semi load of tools (layout/fab/mechanic) need to force myself to unload a ton off the bed Thanks Todd
hey sam how did you get your led lights to flash right when you turn on your turn signal?
they dont flash right. they flash real fast. i am still trying to hook them up so they will blink slow. i just haven't been able to figure it out
somebody told me there was a converter box for dodge to run leds i dont if that is true or where you get them but would like to find out.
yes theres one the leds dont pull enough jiuce so it thinks you light is out
do you know what it is called or where to get one?
An electronic flasher is supposed to slow them down, at least it worked on my Jeep
By CCash
Date 01-05-2009 03:20
Very nice rig! On ours we installed the stock bulb inside the tool box and pigtailed to the LED, it slowed the LED down to normal, and it doubles as a interior light for the box at night.
Cash
I have a 07 dodge rigged out and decided to use leds and i haven't been able to get the drivers side blinker to blink slow. Once in a while it will work so i don't know what the story is with it. On my old rig when I put leds in it they would always blink fast untill I put a heavier flasher unit in it.
Advance Auto has a ceramic ground out that is made for slowing down your led lights. It wires into the light and it's only a few bucks. It grounds across the hot and ground on your light to slow it down. It doesn't hurt anything they are made for this. Worked for my lights on my dodge rig and they've been on there for about 7 years. By the way I have to agree, that's the best looking rig I think I have ever seen man, DAMN NICE
was this truck in fort smith arkansas?
That goat is slicker than snot on the probvincial doorknob!!!
no it was on its way to berwitz,pa.
is there alot of pipeline work goin on up there
i haven't seen any accept what we are doing. we have 2 miles of 42 inch
are they starting a new power plant yet or are you just doing maintenance work?
i drive by a power plant every day. there are signs around town talking about supporting the expansion.
yeah ive heard that its definitely going to happen but who knows. it will definitely make for alot of jobs if they do go threw with it.
Very sharp my friend. You do good work.
VERY nice rig....now, iff wee kould ownely no how to spel wright!
thank you both. i am proud of it.
Who are you working for sjkelly? your truck is real slick!
hey sjkelly how do you like your 200D??
By sjkelly328
Date 08-08-2009 01:27
Edited 08-08-2009 01:30
thanks. i am working for henkels & mccoy right now they say we are only going to be here for a couple of weeks. i like my 200 i have had it for 2 years so it is good and broke in.
Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill