Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welders and Inspectors / Welding Equipment Classifieds / 162 engine
- - By Michael Gregory (*) Date 12-30-2008 02:48
Am looking for a 162 engine for a 1953 shorthood, have a gen. out of a 1950 shorthood will trade for engine (gen shows 37 oms).
Parent - - By JTMcC (***) Date 12-30-2008 02:54
What part of the world are you located in?

JTMcC
Parent - By old school pipe (**) Date 12-30-2008 17:28
call Alan Bryant at engine rebuilders and machine in Corpus Christie Texas phone #361-289-0960 he is always looking for round barrels and has plenty of good engines 162 and 163's that he has removed to install Yanmar Diesel's
Parent - By Michael Gregory (*) Date 12-31-2008 00:55
Oklahoma City area.
Parent - - By shorthood2006 (****) Date 01-01-2009 01:18
talk to kay at bills. i took her 2 rebuildable blocks. she may still have them. if she doesnt, let me know as i know where 3 are here in oklahoma...very close to you!
Parent - - By Michael Gregory (*) Date 01-03-2009 02:16
could you let me know where the other 162 are or even a 163
Parent - By raftergwelding (*****) Date 01-03-2009 18:47
i have a 163 i can pat with it needs over hauled i'm 30 miles south of san antonio
Parent - By shorthood2006 (****) Date 01-04-2009 16:06
Highway 60 equipment in ponca city oklahoma. 580 767 0768. Inquire about the "bone pile" on the north fence.
Parent - - By KSellon (****) Date 01-06-2009 19:42
a 163 will not bolt up to a machine with a 162
Parent - - By raftergwelding (*****) Date 01-08-2009 23:51
ummm not to argure with you cause we all kow you are the queen but i have a 54 shorty with a 163 in it. it replaced the 162 that locked up no i didnt do the work
Parent - - By KSellon (****) Date 01-09-2009 14:33
you had the backing plate changed out along with it. The engine alone will not interchange.
Parent - - By raftergwelding (*****) Date 01-11-2009 04:06
i dont know what was done i just know theres a 163 sittin in front of that generator HAPPY BIRTHDAY
Parent - By KSellon (****) Date 01-12-2009 14:31
Thank you and thanks to everyone for the birthday wishes... It was a GREAT birthday, nothing like going out with the girls to celebrate the 36th and have 2 22 years old try and pick you up.    I still got it--whoowho
Parent - - By ramsay (**) Date 01-12-2009 00:38
Hi Kay: Just curious here what is the difference in the two? Bolt pattern? Configuration? Thanks; Mike
Parent - - By KSellon (****) Date 01-12-2009 14:29
On the rear (welder side) of a F162 engine there are casting nips as well as about an 1/8 of inch bolt pattern difference, just to mention a couple.
Parent - By ramsay (**) Date 01-12-2009 16:54
Wow just enough so that they won't interchange... Thanks
Parent - - By 52lincoln (***) Date 01-01-2009 02:02
i know a guy who has a 58 model that needs to be rebuilt.it runs right now just knocks a littlle.complete welder.remotes,p/c board,murphy guages.got alot of good parts .he's asking 1500 call jeremy (214)316-3567.or call me (214)534-0216
Parent - - By shorthood2006 (****) Date 01-01-2009 17:40
vern does the 58 model run ok...do you think it will rebuild ok?
Parent - By 52lincoln (***) Date 01-02-2009 01:11
yea its a good machine.he was using it everyday when it started knocking so he quit it before it trashed anything else like a rod through the block
Parent - - By raftergwelding (*****) Date 01-04-2009 21:51
Darin you in the market for another shorty i have access to a 53 and a 56
Parent - - By shorthood2006 (****) Date 01-04-2009 22:13
my wife made me promise that i wouldnt buy any more welding trucks,welders, welding beds for a while. however, if i can buy and sell for a profit...now that is another story. I do have a bed for sale as my new bed is about a week away from paint.
Parent - - By raftergwelding (*****) Date 01-04-2009 22:38
a promise is a promise you'd be breaking it and i dont have any more room in my house for tenants so becareful lol i saw the add for the bed sure wish i had the money i'd come get it
Parent - - By shorthood2006 (****) Date 01-04-2009 22:43
i look like sanford and son with all the welding equipment around.Robyn says its time to clean up the place!
Parent - - By raftergwelding (*****) Date 01-05-2009 00:54
my old place looked like that so i reconciled alot of stuff had 5 machine in jan. last yr down to 2 and 1/2 hauld off alot of scrap and my brother and father in law stole the rest while i was in the hospital. what ya got your trying to get rid of i'd like to take that bed off your hands but still getting bck on my feet almost there
Parent - - By shorthood2006 (****) Date 01-05-2009 01:07
the totalled 99 still runs and drives, however the frame is extremely bend behind the cab. it has a GREAT running 5.9 cummins with great 5 speed transmission. Make an offer.
I think i got the bed sold to a guy in Florida. he has emailed me 3 times and is very interested.
Parent - - By shorthood2006 (****) Date 01-05-2009 01:08
robyn wants me down to just one truck....man,,,thats tuff!
Parent - - By raftergwelding (*****) Date 01-05-2009 01:11
i got 1 truck and 2 running machines and i do just fine but would like a back up rig but after all i been thru just glad to have what i have it's junk but it runs with the vantages and 300d's all day everyday sounds like hell looks like hell but makes the maoney maybe this year i'll get a new or new to me machine wife said we are getting me a bed and new machine this year we'll see we need a house first
Parent - - By shorthood2006 (****) Date 01-05-2009 01:13
is work still steady in Brady?
Parent - By raftergwelding (*****) Date 01-05-2009 01:15
we just got done in shreveport last nite taking some time off then back to brady
Parent - - By raftergwelding (*****) Date 01-05-2009 01:12
whats the work like in okl
Parent - - By shorthood2006 (****) Date 01-05-2009 01:14
every pipeline shut down during the holidays. im building a 75x100 hay shed in ks. I will have it done in 2 wks and was invited to go pipeline around the 21st of Jan. near Canadian, tx.
Parent - - By raftergwelding (*****) Date 01-05-2009 01:17
what about the rig yards
Parent - By shorthood2006 (****) Date 01-05-2009 01:21
i heard that Nabors is firing up in February in OKC. just heard that today. Nomac has a skeleton crew right now in El Reno(west of okc)
Up Topic Welders and Inspectors / Welding Equipment Classifieds / 162 engine

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill