Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic American Welding Society Services / Technical Standards & Publications / AWS D1.2 - Side Bends for 3/8 Plate Procedure Qualification
- - By MBSims (****) Date 07-20-2016 23:19
Long time, no post guys. Hope everyone is doing well.

I'm in the midst of doing a 3/8" thick aluminum plate procedure qualification test to AWS D1.2-2014 and have discovered that side bends are not permitted as an alternate to face and root bends. Is this correct or have I missed something in the notes or text of the code?

Marty
Parent - By pipewelder_1999 (****) Date 07-24-2016 01:00
I have noticed this in D1.5 if I recall. Not sure why they work for one D1.x code and not another.

I don't have access to a D1.2 so I'm not much help.

Gerald
Parent - By TimGary (****) Date 07-25-2016 12:05
Hi Marty,

A quick look through my 2008 version confirms your finding.

Tim
Parent - By MBSims (****) Date 07-30-2016 00:14
Thanks guys. I was hoping I missed something. I don't understand why they are not allowed on plate qualification.
Up Topic American Welding Society Services / Technical Standards & Publications / AWS D1.2 - Side Bends for 3/8 Plate Procedure Qualification

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill