By klh
Date 02-28-2007 18:40
Hi Carlos Olivera!
in D1.1 2006,
5.22.3.1(Girth Weld Alignment;Tubular) give the minimum distance between 2 girth welds.
2.8.1.2(minimum overlap).
by readind 2.2(2.2.1 through 2.2.5) i can notice that dictance betwen welds wil be given on the contract plans and specifications. and any specific engineer 's requirement shall be designated in the contract documents.(I think the minimum ditance between welds is also concerned).
but if you finaly find more precision, please let us share the information.
thanks.
klh