Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / Welding Fundamentals / Oklahoma Steam Card
- - By okwelder82 (***) Date 02-23-2008 21:10
I passed my OK State welding cert test yesterday. I've been stressing about it for a week but I took it yesterday and all my bends passed. Just wanted to tell someone.
Parent - By 803056 (*****) Date 02-23-2008 21:30
Good show!

Al
Parent - - By 522029 (***) Date 02-24-2008 00:05
I may be showing my ignorance here but,  what is an Ok Steam Card?

Griff
Parent - - By okwelder82 (***) Date 02-24-2008 02:54
Its just the Oklahoma state welding cert. Basically 6G Certification. You really only need it if you work in OK.
Parent - - By bbwinc (**) Date 02-24-2008 03:18
Congrats on the test!!!!!! What size pipe and what sch.? Just wondering, I'm geting ready to take a similiar test up here in MN.
Parent - - By chrisodom980 (*) Date 02-24-2008 04:35
I think it is 2'' sch 160 could be wrong.
Parent - By bbwinc (**) Date 02-24-2008 05:11
yup same test i'm going for. They call it the Gun barrel, 5p root 7018 out. Anyways nice job good luck to ya!!
Parent - By okwelder82 (***) Date 02-24-2008 16:55
The test I took was 6" Sch 80, 5P root 7018 fill and cap.
Parent - - By 522029 (***) Date 02-24-2008 15:37
So it "is the same thing as 6g" or basically kinda sorta the same thing.  Is the ODOL SSD  the licensing body or is it some other entity?
Parent - By bbwinc (**) Date 02-26-2008 01:30
6g=45 degrees, means the position of the pipe to be welded. Dont know if thats what u were asking.
Up Topic Welding Industry / Welding Fundamentals / Oklahoma Steam Card

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill