Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic American Welding Society Services / Technical Standards & Publications / fillet reinforcement to a cjp/pjp
- - By hogan (****) Date 05-21-2008 17:03
I seem to remember seeing a reference to a fillet size when used in combination with a cjp, when no size is referenced. I'm having trouble finding this reference again. I thought it was in section 2. any help would be appreciated.
Parent - - By jwright650 (*****) Date 05-21-2008 17:14
Was it in the AISC Manual of steel Construction 13th edition? ...there is a chart refering to Skewed Shear tabs. Table 10-13 on pages 10-164 and 10-165.
Parent - - By hogan (****) Date 05-21-2008 17:30
thanks for the reply john. no not for a skewed connection. I was sure it was d1.1. The time i used it was for a t connection (moment).
Parent - By jwright650 (*****) Date 05-21-2008 17:43
AWS D1.1:2006, 2.6.5?....corner or T joint.

Another place is FEMA 353 type designs have added fillets with CJP.
Parent - - By hogan (****) Date 05-21-2008 17:42
OK i found it. The job was back in 97-98. So looked in the 96 code. It is found in 2.14.3 (96), 2.14.3 (98) 2.14.3 (00). I don't have 02, but it is not listed in 04 or 06. has this been moved or is it no longer applicable?
Parent - - By jwright650 (*****) Date 05-21-2008 17:45
2.14.3(96) has been revised...see 2.6.5(06) for the newer version.
Parent - By hogan (****) Date 05-22-2008 22:58
thanks john
Parent - - By js55 (*****) Date 05-23-2008 18:07
2.6.5 is an interesting paragraph to me. I'm not sure I understand the point to it.
It seems to me that all of it is simply a suggestion.
There seems nothing of a requirement in there.
In other words, you can if you want to, and if you do, you need not do it any more than this, and this is not grounds for rejection. to crudely sum it up.
I certainly would have liked to be in on the motiviation for this language.
Parent - - By jwright650 (*****) Date 05-23-2008 18:14
Also see C2.6.5
Parent - By js55 (*****) Date 05-23-2008 18:41
thank you john
Up Topic American Welding Society Services / Technical Standards & Publications / fillet reinforcement to a cjp/pjp

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill