Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / Inspection & Qualification / Inspection documents
- - By 3.2 Inspector (***) Date 10-31-2008 21:27
Gentlemen,
I am looking for some inspection documents, to be more specific:
- Some kind of "sign off form" which has to signed whenever a hold point has been inspected
- A release for hydro test form

That kind of stuff, I am really not that good with a computer, but if I could get something to get me started then perhaps I am able to modify it myself.
I hope I made myself clear :)

3.2
Parent - - By ctacker (****) Date 10-31-2008 22:14 Edited 10-31-2008 22:16
something like this?
The H under QA are hold points
Attachment: Trav_2040120-AnchorBrktAssy_LH.xls (54k)
Parent - - By 3.2 Inspector (***) Date 10-31-2008 22:15
I did not see the attachment at first :)
I cant view it on this PC, I will take a look tomorrow morning.

Thank you
Parent - - By ctacker (****) Date 10-31-2008 22:19
its an Excel file.
If you don't have MS office, theres a program called( I think) open office, or office org. that works ok, its a free download if you do a search.
Parent - - By 3.2 Inspector (***) Date 10-31-2008 22:25
Thanks alot.
I will take a look at it :)

3.2
Parent - - By waynekoe (**) Date 11-01-2008 00:52
Sounds like somebody has been to charm school.
Parent - - By 3.2 Inspector (***) Date 11-01-2008 08:09
Sounds like somebody should stop smoking crack.
Parent - - By jrw159 (*****) Date 11-01-2008 12:57
3.2 Inspector,
  Don't take the bait!!!!! You will be the better person for it. :-) Sorry for derailing your thread. When I get back to the office Monday I will se if I have anything that might be usefull to you.

jrw159
Parent - By waynekoe (**) Date 11-02-2008 05:33
Listen. Nobody is throwing any bait. It's just that the way I grew up, people that talk to each other as mush as the people on this forum do, can pat a person on the back and make a friendly comment. Kind of like we were standing next to each other. Are your skins so thin that you can't see that? There was absolutely no malice in that comment and was none inferred! If I wanted to call someone something, I sure wouldn't do it thru the anonymity of this forum. So guys, relax alittle bit. Life is way too short to spend it pissing and moaning about things that don't matter.
Parent - By swsweld (****) Date 11-03-2008 03:17
3.2 Inspector, you give sound advise. "Sounds like somebody should stop smoking crack."

But it's really, really hard  to stop :)

Sorry, couldn't help myself. I only have a hydro test form but it doesn't have hold points just final signatures.
I might post it tomorrow (Monday) if time permits.
Parent - - By jrw159 (*****) Date 11-01-2008 12:55
waynekoe,
   That comment was totally unnecessary. :-( This person is conducting themself in a respectable manner and has been for a while.

jrw159
Parent - By jwright650 (*****) Date 11-01-2008 14:35
"This person is conducting themself in a respectable manner and has been for a while."-quote by jrw159

I agree with you 100% John. It is very pleasant surprise to see the complete turn around as of late.
Parent - By Joey (***) Date 11-01-2008 14:49
jrw159 - thanks for being a nice guy.

I wonder whether apology is necessary?... but nobody ask hehehe....:=)...maybe Joe's PC is not switch on yet.

Best Regards

Joey

D' CAWI
Parent - By thirdeye (***) Date 11-01-2008 13:58
3.2 Inspector

I sent you a Private Message concerning this.

~thiredye~
Parent - - By Joey (***) Date 11-01-2008 14:23
3.2

I think it will be much easier to control if every inspection stages the ITP have to be signed off (initial) by the fabricator QC / TPI / owner rep until you reach the hydro test etc.

Joey
CAWI
Parent - - By 3.2 Inspector (***) Date 11-01-2008 14:31
You might be correct, however on this project things are a little......different.
Thats why I would like as many different documents I can, and then maybe modify them to this particular project.

And to be honest, I also want to see how others are dealing with it in general, and hopefully benefit from it :)
It is my understanding that Americans in general have a very strict "documentation route" which has to be followed.

3.2
Parent - By Joey (***) Date 11-01-2008 15:04
3.2

I normally do the same...to raise some questions and see how others are dealing with it. Choose the best answers and learn new things.
Even though you know the answer but it's nice to feel that someone provide the same answer like what you think is correct.

Joey
CAWI
Parent - - By gsi (**) Date 11-03-2008 12:52
3.2,
Send me your email if you haven't found what you are lookin for. I have a few different documents that may help.
Parent - By 3.2 Inspector (***) Date 11-03-2008 14:18
gsi,

I reply to you since you are last on the page :)

I have now found what I was looking for, its a combination of what I have gotten from you guys :)
Thank you to all who replyed in this thread.

3.2
Up Topic Welding Industry / Inspection & Qualification / Inspection documents

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill