Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic American Welding Society Services / Technical Standards & Publications / Electrode Questions
- - By hotwork (*) Date 01-22-2009 19:05
Were is the best place to find to find the anwseres about SMAW electrodes like welding studs in the overhead position with E7018 what dia should you use, fillet welding 3/8 stud in the flat position with E7018 what dia It tkes me forever to look these up is there a better way?
Parent - By Duke (***) Date 01-23-2009 01:15 Edited 01-23-2009 01:19
Look in D1.1... 7.5.5 to 7.5.5.7
Looks like for flat, 7018 5/32" is minimum, out of position you may go smaller
This is out of 2004
Up Topic American Welding Society Services / Technical Standards & Publications / Electrode Questions

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill