Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / General Welding Discussion / Setting rack:
- - By jlp (**) Date 03-22-2009 18:16 Edited 03-22-2009 20:17
What is the best way to set the rack up for pipe. Let me add this-If you don't have any marks on bruch rack. Need to find the spot. Thanks for the help.
Parent - By banshee35 (**) Date 03-22-2009 19:30
you talkin about an sa200? best thing to do is leave it alone. but if you must roll it, roll it a hair(literally) one way or the other.
Parent - By 63 Max (***) Date 03-22-2009 22:40
First why do you want to roll it? You shouldn't mess with it unless someone has already rolled it and you just want to get it back to were it should be.
Parent - - By raftergwelding (*****) Date 03-22-2009 22:53
have you check the ocvs
Parent - - By jlp (**) Date 03-23-2009 12:45
yes checked ocv's,rack has been moved and i need to find the right place for it. does not have marks.
Parent - By raftergwelding (*****) Date 03-24-2009 01:29
the punch marks should be there sometime they get full of dirt and rust it happened to me on 1 of my machines that somebody rolled the rack on they are not very big marks about the size of a pencil lead should be at about the 2 o'clock position
Up Topic Welding Industry / General Welding Discussion / Setting rack:

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill