Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / General Welding Discussion / nr-232 overhead groove 068 3/8 plate?
- - By joglazier (*) Date 12-11-2009 12:19
can this test be passed @ 19volts with the wire speed around 125ipm?
Parent - - By Lawrence (*****) Date 12-11-2009 12:29 Edited 12-11-2009 14:28
Hey Sacramento!

I grew up there. (Roseville)

The Lincoln Innershield electrode guide says your right about on the money with that Amp/Volt combination

http://content.lincolnelectric.com/pdfs/products/literature/c32000.pdf

Overhead should run pretty much like an inverted flat weld.. Same *drag* or backhand gun angle and a contact tube to work distance of 3/4" to 1 1/4".
Parent - By joglazier (*) Date 12-11-2009 12:47
hey larwence we talked a few years ago good to hear from you we had snow here on monday
Up Topic Welding Industry / General Welding Discussion / nr-232 overhead groove 068 3/8 plate?

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill