I ran into this .pdf which I found in TALAT which stands for: "Training in Aluminium Application Technologies." Since this paper (lecture) involves the basics in Aluminum brazing, I figured that it may be of some use to anyone needing to review the fundamentals, or to refresh themselves. ;) So ENJOY!!! :) :) :)

http://www.eaa.net/eaa/education/TALAT/lectures/4601.pdf

These .pdf's (Lectures) cover adhesive bonding: 4.7 Adhesive Bonding of Aluminium prepared by Lutz Dorn, Technische Universität Berlin (Basic Level).

4701 Terms and Definitions for Adhesive Bonding Contents: 20 pages, 24 figures.   

http://www.eaa.net/eaa/education/TALAT/lectures/4701.pdf

4702 Factors Influencing the Strength of Adhesive Joints
Contents: 13 pages, 13 figures

http://www.eaa.net/eaa/education/TALAT/lectures/4702.pdf

4703 Design and Calculation of Adhesive Joints
Contents: 9 pages, 10 figures

http://www.eaa.net/eaa/education/TALAT/lectures/4703.pdf

4704 Surface Preparation and Application Procedures
Contents: 12 pages, 13 figures

http://www.eaa.net/eaa/education/TALAT/lectures/4704.pdf

4705 Quality Assurance
Contents: 4 pages, 4 figures

http://www.eaa.net/eaa/education/TALAT/lectures/4705.pdf

I hope these are useful to anyone in here. ;)

Respectfully,
Henry