do it yourself

Date 06-29-2010 20:50

Yeah right do it yourself aint always the best way. My carb would flood out if i left the valve open so i decided to pull the carb and clean real good roday ( done it hundreds of times) got it clean and looking new put it together then put it on and machine wont start choked so close choke and bam it starts running like a 2 legged dog so i start looking and gas is pouring out as fast as it goes in damn the float is stuck so take it off and apart again. What wheres the flaot needle damn i lost it so i look n look and got lucky the ass end of it was just far enuff out of the dirt for the sun to hit it just right clean it off no scratches or nothing from rock so i put it back in and try again and yup that was it. Never fails i usually have to take the carb off and apart twice beofre it gets doen right. Maybe 1 day i'll learn to slow down and pay attention shut up cactus lol

By jrw159

Date 06-29-2010 20:56

Um... well..... Oh never mind. LOL :-) Glad you found it.

jrw159

By ACOSTA

Date 06-30-2010 02:34

call me when you get a chance, shad

By Cactusthewelder (*****)

Date 06-30-2010 02:45

I didnt say a word !!!!

By up-ten

Date 06-30-2010 03:25

Can hear what your thinking all the ways up here Cactus! lol.

By JLWelding (***)

Date 06-29-2010 21:53 Edited 06-30-2010 03:15

It dont do no good to slow down and take your time. It's gona happen anway it is known as the Joe factor and if you stand to close it will happen to you and you can never get rid of it. Just ask your friends they got it too by now.lol