Welders pallet

Date 08-19-2010 18:51

Im doing a bunch of overhead stuff today and its all in the grass... Im using an old pallet to lay on and its working ok...

What do you guys use.??? I have seen pictures of pallet looking things guys are laying on and I am going to make me one...

I saw one on youtube a while back that had an adjustable head rest.. Its was sweet looking..

Anyway If you guys could post pictures or do's and dont's of building one I would sure appreciate...

Thanks..!!

RC

By Johnyutah (**)

Date 08-19-2010 23:53

A mud board is what you want.

By pocket change (**)

Date 08-20-2010 01:02

built mine outta 1" x 4" lumber then used 2" x 4" lumber to connect it a together "run the 1x4 say north and south with little spaces between them - run the 2x4 east and west at the top put two 2x4 close together about 1 3/4" space between them. then place two more 2x4 spaced out evenly the remaining length of the 1x4 boards FYI: use a short piece of 2 x 12 lumber cut to the width of the mud board. stand it on edge it kinda becomes adjustable not just your head but your whole body" (lot more comfortable)