Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / ASME Codes / NCA 3800-NDE Visual requirements.
- - By Mikeqc1 (****) Date 07-30-2011 14:07
I would like some input.
In an audit of  NDE subcontracted service to nca-3800 requirements,  NCA 3852.1 (4) (b)  I see that all nondestructive personnel shall be qualified in accordance with NB-/ NC-/ND-/NE-/NF-/NG-5521.
In NB-5520 personnel qualification certification and verification NB-5521 (4) For visual examination the Jaeger -1 chart SHALL be used in lieu of Jaeger-2 ………
I know what my Answer is but it’s not the same as others in the lab.
I take this as if we use a subcontracted NDE facility they will need to have a written practice that states eye exams will be done to J-1 and so recorded on their records.
I have the manual and written practice, but the written practice states J-2.
In my opinion they must have the requirement of J-1 in the written practice for them to be approved to 3800 requirements.
I was told that because we review the reports it’s not necessary for them to have J-1.
Again I feel that they must meet J-1.
Any opinions would be appreciated…..because I don’t think they should be approved until they meet J-1.
MDK
Parent - - By js55 (*****) Date 08-01-2011 13:33 Edited 08-01-2011 16:23
mike,
Not sure what they really mean by "we review the reports" but their written practice must reflect J-1 and they must have verification of J1 in the personnel file.
This change from J2 has gone unnoticed by many people and has caused quite a stir. It is actually something the Teams are specifically looking at because they know it has gone unnoticed by many.
Parent - - By Mikeqc1 (****) Date 08-01-2011 20:17 Edited 08-01-2011 20:24
Nobody gets approved until its fixed.
Can i test them if designated by my companies level III to do the eye exam?
Parent - - By js55 (*****) Date 08-01-2011 21:07
mike,
If they are operating under your program I say yes. But I suspect, even though they comply with your program, they are actually operating under theirs as an approved vendor, and therefore it is their Level III that needs to designate.
Parent - By Mikeqc1 (****) Date 08-02-2011 01:43
that makes sense
Up Topic Welding Industry / ASME Codes / NCA 3800-NDE Visual requirements.

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill