Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / General Welding Discussion / one down 1500 to go
- - By makeithot (***) Date 10-20-2011 00:12 Edited 10-20-2011 00:26
going to be a socket welding fool after this jobs done. only 60 weld necks on the whole job 1 1/2 - 2. Had to put the cabin picture in cause that's what makes it all worth while.
Attachment: IMG_0236socket1.jpg (7k)
Attachment: IMG_0238setup1.jpg (10k)
Attachment: IMG_0237setup2.jpg (9k)
Attachment: IMG_0237setup2-1.jpg (9k)
Attachment: IMG_0241jig.jpg (8k)
Attachment: IMG_0242firstline.jpg (6k)
Attachment: IMG_0243topofpit.jpg (8k)
Attachment: sundownatcabin.jpg (13k)
Parent - By Pickupman (***) Date 10-20-2011 01:44
Hey whats all that white stuff on the ground???:eek::grin::grin: Sure like the view off of your deck.
Parent - - By weldwade (***) Date 10-20-2011 03:37
Brrrrrrr looks cold! It was a very pleasant 82* here today. Light breeze from the west and sunny with no chance of snow! I have the same view of the pit minus all that slippery cold snow.

Sorry gotta convince myself that days like today are worth all the 110+ days we have!
Parent - - By eekpod (****) Date 10-20-2011 10:57
Do you use gap o let's to keep the gap or do you measure them?

I don't know where you are but wow snow already holy cow.
Parent - By makeithot (***) Date 10-21-2011 01:42 Edited 10-21-2011 01:56
No they have nothing that fancy up here they didn't even know they are an option so I measure it all out. Ya no global warming up here.
Parent - - By qcrobert (***) Date 10-20-2011 11:53
Natural gas piping?
Parent - By makeithot (***) Date 10-21-2011 01:53
No it is for desiel fuel for a fresh air recovery system that heats the air before it goes into the mine. I will post some shots of that tomorrow the pump unit that is in the pictures will have a fuel heater to warm up the fuel before it goes into the burners along with some other components which have yet to arrive the herc is apparently broken should be back in the air in a week or two. Nothing happens fast up here.
Parent - - By makeithot (***) Date 10-22-2011 23:56
Some shots of the burners and fans and a completed unit.
Attachment: IMG_0247desielheaters.jpg (11k)
Attachment: IMG_0246desielheaters2.jpg (12k)
Attachment: IMG_0248intakeside.jpg (9k)
Attachment: IMG_0245whencompleted.jpg (10k)
Parent - - By up-ten (***) Date 10-23-2011 00:29
I see those Rio Tinto commercials advertising for positions up there and they sure make it look good and then I see your pictures and go, nope. c'est brrr. Holding off on winter down here as long as we can.
Parent - By makeithot (***) Date 10-24-2011 03:24
Not that I have any intention of going but, prison would be a cake walk after this place. When this contract is over I would have a hard time doing another I don't care how much they offer
Up Topic Welding Industry / General Welding Discussion / one down 1500 to go

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill