D1.1 2010 Table 4.10

Date 04-11-2012 19:21

D1.1 2010 Table 4.10 note (h). Anyone notice the discrepancy there? The reference must be a misstype. I don't see the reference in the notes located within the sections listed as 4.25 and 4.26. These sections do not address the concern at all. Nor does it appear to be directing us to the Figures. This is applicable to fillet welds on pipe and T, Y and K connections. Anyone have input on this? Question is: where is note (h) attempting to point us to? sections, tables or figures or a section not apparent to me?

By 803056

Date 04-12-2012 03:22 Edited 04-12-2012 12:45

I don't have my 2010 edition handy, but I believe they are referring to clauses 4.25 and 4.28. I did look at my 2008 edition. Both clauses 4.25 and 4.28 directs the reader to Table 4.11 where restrictions are placed on the dihedral angles.

Best regards - Al

By PWCameron (**)

Date 04-12-2012 11:03

Looks like the text for Note h is the same (2008 to 2010) but the referenced Sud-Clauses were changed. The Note should now reference 4.26 & 4.29 not 4.25 & 4.28.

Good catch. Go to the head of the class.
PWC