Dragline Wear Blocks

Date 08-31-2012 01:32

I am looking for a source or supplier of the wear blocks for a dragline bucket. We have a brand new bucket and I would like to line it with these diecast blocks approximately 3 inches square and weldable to the bucket surface. I am located in New York. I would appreciate any information someone could give me .
Thanks
Theweldor

By Cumminsguy71 (*****)

Date 08-31-2012 01:48

Check these, 3 product down, Infinity Bimetallic wear products, in that section they have buttons, blocks, bars, weld on.

http://www.escocorp.com/markets/mining/universal_wear_solutions.html

Place is out of Oregon according to their site.

By DaveBoyer (*****)

Date 08-31-2012 02:30

That 27% chrome white iron is going to have tremendous wear resistance, as it will be full of chrome carbides, and at 700 Brin. is hard enough to take the pressure abuse.

By ctacker (****)

Date 08-31-2012 03:56

Bradken also has wear blocks.
http://bradken.com/ourproducts

By theweldor (*)

Date 09-01-2012 00:54

Thanks for the replies. They had originally want to hardface the wear spots on the bucket. I have way better things to do than weld hard surface rod for days on end.

By J Hall

Date 09-01-2012 10:45

http://www.kencoengineering.com/default.php