Pipeliner 200D problem

Date 10-25-2012 01:25

My 200D is revving up while I'm welding, it might do it one per weld, once per hour or once per day or several times per rod,day,or hour there is no consistency to it. What is causing this? I have unplugged the arc force knob to eleminate that possibility. Any thought are appreciated thanks in advance!

By KSellon (****)

Date 10-25-2012 22:17

sounds like throttle solenoid issues.

By 12vstrokethis (**)

Date 11-01-2012 04:01

K what is the part number for the fuel fiilter in the canister not the big filter.... Also how can you test the solenoid... And if bad where can I get one. Thanks

By KSellon (****)

Date 11-13-2012 23:53

kubota water seperator filter wix33389
perkins water seperator filter wix33263

Yes the throttle solenoid should be 300+ ohms

By DaveBoyer (*****)

Date 10-26-2012 07:07

The diesel in My boat would over rev if it was starving for fuel [counter intuitive, I know].

This would happen if a fuel filter was starting to plug up as well as if actually running out of fuel.

It had something to due with air/vapor in the injector pump housing.

Mine has a distributer pump, a Roto design. This might not happen on an inline pump.

By Regmanager (**)

Date 11-01-2012 13:08

Idler/Engine Protection P.C. Board L10827-1