standard WPS for SMAW Carbon Steel to Austenitic Stainless

By Lawrence (*****)

Date 12-31-2013 12:40

Welcome to the forum Mehdi

You might like to look at this:
B2.1-1/8-228:2002 (R2013) (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 or 2) TO AUSTENITIC STAINLESS STEEL (M-8/ P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L)-15, -16, or -17,

http://pubs.aws.org/p/347/b21-18-2282002-r2013-swps-for-shielded-metal-arc-welding-of-carbon-steel-m-1p-1s-1-groups-1-or-2-to-austenitic-stainless-steel-m-8-p-8s-8-group-1-18-through-1-12-inch-thick-e309l-15-16-or-17

You will need to be VERY careful to be sure that the production work you intend to do matches the parameters set forth in the standard.

SWPS are of limited use, unless the work you are doing falls into the scope of the doccument.

Cheers

.

By Mehdi Vafakhah Date 01-01-2014 05:25

Thank you Lawrence

By welderbrent (*****)

Date 12-31-2013 15:01

While I am pretty sure the link Lawrence gave you will take you to the same spot, here is the link for all the SWPS's offered by AWS.

http://pubs.aws.org/t/procedures

Oh, WELCOME TO THE AWS WELDING FORUM!!

Have a Great Day, Brent

By Mehdi Vafakhah Date 01-01-2014 05:25

Thank you Brent .

By jherrera (*)

Date 01-09-2014 01:47

309 filler metal... root GTAW, fill SMAW or GMAW