Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / Technical Discussions / WPS of aisi 4130 under ISO standards
- - By vignesh5585 (*) Date 06-10-2014 16:18 Edited 06-10-2014 16:52
dear all

Our firm has decided to go for welding of aisi 4130 pipe with 62.5mm OD and 12.5 mm thickness with tig under ISO standards. so i am clueless how to make wps of this material. suggestions are highly appreciated
Parent - By ssbn727 (*****) Date 06-11-2014 06:59 Edited 06-11-2014 07:14
Do you have a copy of the ISO standard? If you do and you have developed WPS's previously then you shouldn't have a problem @ all unless, I'm missing something here like why are you even attempting this without having any knowledge of the standard? Again, Do you have access to the ISO standard and do you have experience developing WPS's?

What you're asking us to do for you is something that many of us are paid good money to produce so, don't expect much especially without any details, or not exhibitng an understanding of how to develop a WPS... You have asked for help here many times in the past and we have helped you on similar matters, and yet you still come here and basically ask us to do the work for you...

Now give us all of the details and we'll go from there but, you must do most of the work because all we can do is to guide you somewhat through your current dilemma...

So describe in absolute detail what you are doing.

Respectfully,
Henry
Up Topic Welding Industry / Technical Discussions / WPS of aisi 4130 under ISO standards

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill