Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic American Welding Society Services / Technical Standards & Publications / AWS D1.1-2010- Table 4.5 # 31
- - By Nalla (***) Date 06-20-2014 17:09
Dear Experts

31) A change in groove type (e.g., single-V to double-V), except qualification of any CJP
groove weld qualifies for any groove detail conforming with the requirements of 3.12 or 3.13

Query.
PQR qualified with Single-V in 3G Position ( CVN tested -40 dec C / Weld Process-FCAW/ Test Coupon thk-25,4mm).
Can i weld all groove detail as listed in 3.12 OR 3.13 conforming to groove configuration details( Root Gap, Root Face, Bevel Angle)?

Does any one have AWS Interpretation in this subject?

Sincerely appreciate prompt answer
Parent - By 803056 (*****) Date 06-21-2014 01:47
You can weld any of the prequalified joint details depicted in Figure 3.3 and 3.4 for PJP and CJP groove details.

Al
Up Topic American Welding Society Services / Technical Standards & Publications / AWS D1.1-2010- Table 4.5 # 31

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill