American Welding Society Forum
Anyone, have experience welding 12-Chrome Steel Casting(CA6MN)?
What are the pre-heat, post-heat and interpass temparatures?
Preheating is not required. PWHT depends on if you are welding CA6NM class A or Class B. For class A, PHWT between 1050 and 1150F, and for class B, intermediate PWHT at 1225-1275, then cool to below 200F and re-PWHT at 1050-1150F. This is all per ASTM A487. Typical maximum interpass temperature is 400F. Use 410NiMo filler metal. It is available for the FCAW, SAW, SMAW, GTAW, and GMAW processes
Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill