Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welders and Inspectors / Welding Equipment Classifieds / SA 200 Parts
- - By Cumminsguy71 (*****) Date 12-15-2015 17:57 Edited 12-15-2015 18:59
Ok, trying this again. I have multiple SA 200 parts.

-SA200, 1951 Shorthood engine, F162. It is locked up and have had used oil in the cylinders trying to work it loose. Has oil pan, head, front timing cover, internals. This does not have magneto or governor on it. It has the original generator though. $100.00

-SA200 1951 Shorthood, back end. It is minus a few parts, does not have shunt coils, do not have round cone for the end. I have the armature in the garage next to the engine. The back end is outside but has been under the awning of my barn for storage. $300.00 o.b.o

-SA200 Unknown year, F163 99.9% complete. I had to rob the rear main seal retainer/holder for my SA250. Other than that this engine is complete. The exhaust manifold of course is garbage. It has been garage kept and turned over occasionally. I was keeping it around for spare parts or rebuilding for my SA250 but since the shunt coils took a dumper on the SA250 I'm not concerned at the moment. $200.00

-SA200/250 Oil bath air cleaner. Complete $75.00

-SA200 1951 Shorthood engine fan, good condition, not bends or damage to speak of. $25.00

First come first serve. Contact me thru here with questions and if interested I can pm my contact info. I can't ship these for free, meaning my time to run around hunting down a pallet, boxes or whatever else does have a price. There is a shipping company 5 miles from my house, I can load on a pallet and drop at their dock and give you their contact info so you can work out shipping address and payment.

Note: If you want to pick up at my place bring a cherry picker or lots of strong backs for the engines. My cherry picker broke hoisting my SA250 and have not bothered to buy another yet.
Parent - By _gomez_ Date 12-21-2015 19:32
Just wondering if you'd sell that magneto separately?  Can't really see what condition its in.
Up Topic Welders and Inspectors / Welding Equipment Classifieds / SA 200 Parts

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill