American Welding Society Forum
As neither SA 435 nor SA 578 calls for UT of plates less than 10mm plate,what tewchnique to bu sused for getting UT of 8mm plate
SA-435 & SA578 are specifications for the Straight Beam UT of plates. They call out the techniques to be used to perform the examinations. Some other part of the design code ( Section I, III, VIII etc.) may do this or the design engineer will specify UT inspection to a certain specification.
Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill