Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / Technical Discussions / Tapering to 1:4 ratio
- - By Nallavan Date 03-24-2018 22:18
Dear Experts

Pls refer attached sketch and advise.
Where the taper shall start from- 1  or  2?

My understanding shall be  as per point 2.
Parent - By Tyrone (***) Date 03-26-2018 11:05
Hey Nallavan,
Please attach your sketch.
Up Topic Welding Industry / Technical Discussions / Tapering to 1:4 ratio

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill