Page 24

Inspection Trends - January 2011 - Winter

well as A-scan, B-scan, and C-scan representations — Fig. 2. In comparison to manual pulseecho techniques, the advantages of phased array testing are its excellent repeatability, increased inspection speed, more accurate results, and the ability to inspect complex geometries and to visualize indications in welds and/or base materials using B, C, D, and S-scans (with all A-scans included). Moreover, phased array allows the digital storage of all data, location, and system settings, and is very much safer to operate within a working environment when compared with NDE methods that use X-rays and gamma-rays for detecting imperfections. This technique is ideal for use in combination with tank floor testing. The tank floor is first tested with magnetic flux leakage (MFL) equipment. Traditionally, when an indication is found by MFL, the area of the indication is checked with a thickness gauge or portable flaw detector. The chances of missing a pinhole indication are very high using that equipment, but when a phasedarray probe is used (Fig. 3), the indication becomes very clear. The time taken to inspect the area is also much shorter using the phased-array probe, since it can inspect 44 mm at a time. Phased array can also be used for the detection of laminations caused by hydrogen-induced cracking. Typically, this is done using a traditional ultrasonic probe, which is time consuming. Using the phased-array probe saves a lot of time, because it can quickly determine whether there are any indications present or not. The probe can be used on all vessels or pipes that are suspected of having corrosion problems. Phased Array by SGS Industrial Services SGS Industrial Services, part of the SGS Group, is a global service provider for technical verification, inspection, testing, and conformity assessment. SGS Industrial Services performs conventional and advanced NDE inspections throughout the world and is continuously developing its services and applications. The company operates in more than 30 countries worldwide. Applications include fabrication, pipe manufacturing, pipelines, plant construction, chemicals, petrochemical plants, shipyards, the offshore industry, and conventional and nuclear power plants. When conducting phased array inspections, the company’s experienced and qualified NDE experts not only provide the phased array inspection test results, but also a detailed interpretation of the data obtained and technical consultancy to advise the next steps to be carried out. Fig. 3 — An example of a dual array corrosion probe. Based on information provided by SGS Industrial Services, www.sgs.com/industrial. Fig. 2 — Corrosion pattern as displayed by the Phasor CV/DM. Phased array technology can display simultaneous views of different presentations, such as sectoral views, as well as A-scan, B-scan, and C-scan representations. T R E N D S ������������������������������ ������������ ������������ �������������������� ������ ������������������������ �������������������� ������������������ �������������������������������������������������� ���������������������������������������� �������� ������������ ������������������ ������������������������������ �������������������������������������������������������������� �� ������ ������������������������������������������������������������ ���������������������������������������������� ������������������������������������������������������ ������������������������������������������������������������������ ������������������������������������������������������ ������������������������������������������������ �������������������������������������������� ���������������������������������������������������������������� ���������������������������������������������������������������� ������������������������������������������������������������������������ ������������������������������������������������������������������ ������������������������������������������������������������������ ������������������������������������������������������������������������������ ���������������������������������������������������������������������� ���������������������������������������������������������������������������������� ���������������������������������������������������������������������������� �������������������������������������������������������� �������������������������������������������������������� �� �������������������������������������������������������������� �� �� �� ������������������������������������������������������������ �� ������������������������������������������������������������������ �������������������������������������� ���������������������������� ���������� ������������������������������������������������������ �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �������������������������������������������������� ������������ ������������������������������������������������ ������ 28 Inspection Trends / January 2011


Inspection Trends - January 2011 - Winter
To see the actual publication please follow the link above