Not logged in
American Welding Society Forum
Forum
AWS Website
Help
Search
Login
Topic
Welding Industry
/
Technical Discussions
/ Welding Aircraft Tubing
By
Don Hansen
Date
12-01-2002 18:53
I've seen several references to TIG welding 4130 aircraft tubing with either ER70S-2 or ER70S-6. What are the differences in these two filler rods. Is one preferred over the other for welding 4130? and if so why?
Don Hansen
By
airweld
Date
12-01-2002 21:46
http://home.hiwaay.net/~langford/sportair/
http://www.tigdepot.com/
You will find info on TIG welding airframe tubing at these sites. Good luck, Scott.
By
TiG6al-4v
Date
09-12-2003 03:05
ER80S-D2
Topic
Welding Industry
/
Technical Discussions
/ Welding Aircraft Tubing
Forum
AWS.org
- Forum News & Help
American Welding Society Services
- Certifications
- Technical Standards & Publications
- Conferences & Shows
- AWS Learning & Education
Welding Industry
- General Welding Discussion
- Technical Discussions
- Inspection & Qualification
- Welding Fundamentals
- Processes
- ASME Codes
- Welding Safety
- Metallurgy
- Welding Documents & Downloads
Welders and Inspectors
- Education & Training
- Welding Equipment Classifieds
Sections
- Section 7: San Francisco
- Section 32: Rochester
- Section 39: Colorado
- Section 41: Puget Sound Olympic
- Section 55: Arizona
- Section 81: Nebraska
- Section 110: North Florida
- Section 112: Florida West Coast
- Section 135: Nevada
- Section 156: Inland Empire
Chit-Chat & Non-Welding Discussion
- Off-Topic Bar and Grill
Powered by
mwForum
2.29.2 © 1999-2013 Markus Wichitill