Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / General Welding Discussion / Scrap Pipe
- - By JohnJohn (**) Date 07-27-2008 15:28
Does anyone know where I can pick up some 12" scrap around Ft. Worth? I'd like 0.250 and/or 0.375 wall. I got a fella who's gonna hold my hand and show me the ropes for a 12 on 12 branch test and I just need the pipe to practice on. I priced a 20' joint and it was $850. Any leads would be much appreciated.

Thanks,

JohnJohn
Parent - - By 52lincoln (***) Date 07-27-2008 16:55
eagle steele in hutchins usually has some drop off they sell by the pound.dont call you just have to go and look outside.there on 45 south of 20 in hutchins.
Parent - - By JohnJohn (**) Date 07-27-2008 17:06
Thanks,I'll check that out. I'm working in Waxahachie so I could run up there on my way home. I'm sure there is some out in the oilfield somewhere, just need to grease the right wheel.

JohnJohn
Parent - - By 52lincoln (***) Date 07-27-2008 17:18
whats going on in wax ?
Parent - - By JohnJohn (**) Date 07-27-2008 17:36
I'm doing a structural job. We demo a 30,000 sf metal bldg(150x225x30), everything but the frames and are about done putiing on new purlins and sheets. It's been a b**tard, roof was so rotten you couldn't walk on it, had to cut purlins from below and drop roof in 30x25 sections. I'm tired of structural and wanting to get back in the oilfield.
Parent - By ZCat (***) Date 07-27-2008 17:43
find you a little (or big) shop and see if you can go thru their scrap bin
Up Topic Welding Industry / General Welding Discussion / Scrap Pipe

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill