Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / Technical Discussions / WPS for SAW
- - By ctate (*) Date 02-26-2003 16:39
Can anyone tell me where I can find a WPS for SAW?

Thanks,
Chuck
Parent - - By jwright650 (*****) Date 02-26-2003 17:52
Can you use one of the prequalified joints?
John Wright
Parent - - By ctate (*) Date 02-26-2003 19:06
What prequalified joint would you be talking about?
Parent - - By jwright650 (*****) Date 02-26-2003 19:10
In D1.1 Section 3 there are prequalified joints for SMAW, FCAW, GMAW, and SAW. If you use one of these you can write WPS's and you don't have to qualify them. I was assuming you were working to the D1.1 code. Just trying to save you some work and $$'s.
John Wright
Parent - - By ctate (*) Date 02-26-2003 19:32
We are working to D1.1. Thanks for the help.
Parent - By CHGuilford (****) Date 02-27-2003 14:10
As I mentioned in your other post, get the manufacturer's data for the filler metal and flux combination. If you are going the D1.1 prequalled route, you should have that data on file anyway.
CHGuilford
Up Topic Welding Industry / Technical Discussions / WPS for SAW

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill