acutally, i think i have some new ones. along with the insulater kit as well. other than that, call bills welder. or i usually go to NAPA in eunice louisiana
Fairbanks Morse magneto points.
FM J mag uses FM#-- R2437 points or NAPA Echlin-- ECH CS1500 or BWD-- FS50 or Standard#-- S3-480
FM X mag uses FM#-- A2437A points or NAPA Echlin-- ECH CS1504 or SME 701014 or Borg Warner BWD -- FS11 or Standard#-- S10-478
If your mag housing or tag isn't marked J or X the J mag has the dist rotor gear inside the cover cap or the X mag has dist rotor gear mounted on the breaker points bearing plate.
Condenser: FM J & X, Low Capacity FM# AXMR2433, NAPA# SME 701308, BWD# FG6, Standard# S6-138
FM J& X, High Capacity FM# SXY2433, NAPA# FM200, BWD# FG3, Standard# S6-138
I recommend using the high capacity condenser FM200 will help points last longer. NAPA coils = china junk leave them alone! There are other coils still made here.