Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / General Welding Discussion / pipe intersections
- - By sprinklerwelder (*) Date 07-28-2003 21:42
i could use some suggestions about fabricating thing such as T's,Y's,crosses,saddles,ect.i would like to become a better welder with your help! as i have said we usually weld schd.10 pipe for fire sprinklers.
Parent - By pipewelder_1999 (****) Date 07-28-2003 21:51
I have a basic page that explains a part of how to lay them out at http://www.weldinginspectionsvcs.com/pipetemplatesample.htm

There are a few more resources on the web but I have little time right now.

G Austin

I hope you have a nice day
Parent - - By sprinklerwelder (*) Date 07-29-2003 20:01
thanks for the help. any more info would be helpful
Parent - By ssbn727 (*****) Date 07-29-2003 20:36
Hello sprinklerwelder!

I came across this website awhile back and it may be of some use:

http://www.ezpipe.com/

Also, "the Gangbox" link in this website has all sorts of books, and tools that might help: http://www.jobhotsheets.com/gateway.htm

Hope this helps...

Respectfully,

SSBN727 Run Silent... Run Deep!!!
Parent - By JINX (*) Date 07-29-2003 20:44
If you are looking for a simple easy to use layout tool contact, Pipe Master at Ph 360.668.3291 or Fax 360.668.9533. The literature describing their layout tools does not list a web site.
Jinx
Parent - By pipewelder_1999 (****) Date 07-29-2003 22:56
There is a pretty good thread on the subject at http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=b1c7a.1997%24Uy4.163558%40bgtnsc05-news.ops.worldnet.att.net&rnum=1&prev=/groups%3Fhl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26selm%3Db1c7a.1997%2524Uy4.163558%2540bgtnsc05-news.ops.worldnet.att.net

Have a nice day

Gerald Austin
Up Topic Welding Industry / General Welding Discussion / pipe intersections

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill