Hi all,
I have a problem with a welding process for a vessel we are fabricating. We are required to weld a 65 mm thk flange to a nozzle. The flange is ASTM A 105 and the nozzle is 304 L. But our problem is that we dont have a procedure that covers this range. and we dont have plates of 38 mm thickness either. So i was wondering if there was some way around this, like some interpretation or code case i could use that makes some clever use of the technicalities to get around this clause.
Any help will be much appreciated. Im in a bit of a tight spot here, so quick responses will be all the more welcome.
Thanks