By -
Date 11-13-2000 01:44
I don't know if they have a web site but try the "Universal Pipe-Fitters' Layout Guide" It's published and available for $8.00 a copy from-
The Universal Welding Supply Co.
Cedar and Oak Streets
New Lenox, Illinois 60451
This has been a standard issue to all journeyman "Industrial Pipe Fabricators" (not to be confused with pipefitters) that work for Dow Chemical.
Here is an interesting site for pipe offsets:
http://travel.to/ajsoffsetpage/
Marty Sims
By -
Date 11-24-2000 19:20
Delete message
By -
Date 11-24-2000 19:23
Thank you Mr. Sims for the plug,
My web site A.J's Offset Page does have pipefitting tips, it also has a page that will calculate various offsets. The formulas are not presented but if there is a specific problem that you are working on you can always drop me a line and I will try to help you out. I'am always more than happy to share a formula if it can get you out of a jamb.
Web Site U.R.L. http://travel.to/ajsoffsetpage
Drop me a line if you've got a specific question
A.J.