Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welders and Inspectors / Welding Equipment Classifieds / looking for a sa-200
- - By dogweld (***) Date 01-11-2011 04:01 Edited 01-11-2011 04:04
I'm looking for a red face welding machine , I need a new project ,machine, must weld (shunt coils must be good ) and motor must be in good running order , I'm looking to upgrade it for a project ,I live in east Texas about 60 miles east of Dallas <TX  ,I'll be up frount with you all ,all I want to send is $1,000.00  to $2,000,00 cash ,please no high dollar machine ,
I'm a retired welder that like to rebuilding  welding machine  . you can let me know what you have , I like all sa-200  , but would like to do a redface .
thank's
Parent - - By Marsh Welding (**) Date 01-11-2011 04:18
if you feel like takin a drive i have a 66. all it really needs is painted and upgraded. it a low hour all original machine. i would take $2500 for it.
Parent - - By dogweld (***) Date 01-11-2011 04:35 Edited 01-11-2011 04:40
what type of drive ,you talking about ,my limit is $2,000. as I said ,I might meet you half way on the price ,E-mail me some pictures
richtx@aol.com
Parent - - By Marsh Welding (**) Date 01-11-2011 04:39
im in southwest iowa but i wont take less than $2500. youd be hard pressed to find a better low houred machine as this. it was only owned by a weld shop used for mobile farm equipment repair. stored inside up till a year ago when i bought it. i just havent had time to get it fixed up.
Parent - - By dogweld (***) Date 01-11-2011 04:41 Edited 01-13-2011 00:53
that a long way's to go , I think that a little far north of  the red river ,thank's anyway
Parent - - By dogweld (***) Date 01-13-2011 00:52
that just to far to go ,wish I live closer ,I went to look at a 62-redface  today in dallas  ,tx the guy told me over the phone that it welded great ,and there was not a thing wrong with the motor ,so I went up there and the motor was shot ,smoke like a train ,the motor sound like it was going to blow up , to make a long story short it was junk , still looking for a new project !!!!!!!!!!!!!!!!
Parent - - By Tyler1970 (***) Date 01-17-2011 16:28
I got a near 200 believe it is around 90-93 model armature just redone by Martinaiz and runs great. My back up. 3000 in central louisiana
Parent - - By dogweld (***) Date 01-17-2011 17:33
is that that red sa-200 that you been trying to sale for a long time ??? as I said in the post all I have to spend is $2,000.00
Parent - - By Tyler1970 (***) Date 01-17-2011 18:50
No im running my rred 200 now. Im saving for a pipe pro.
Parent - - By Chris2626 (***) Date 01-18-2011 00:13
this is kinda a funny post, the man said 1000-2000 and everyone keeps posting something for more then that, why waste his time either you have something for that price or not whats the deal
Parent - - By Tyler1970 (***) Date 01-18-2011 01:40
Well there chirs maybe we put our machines up there just incase he cant find a worthy machine for two grand. And he may consider spending alittle more than he hoped to get a machine that needs little work. Like paint. And few cosmetics.  If you do run a rig and you know anything about running a 200 you should know that it is hard to find a 200 that needs no motor work. And that can crank right up and weld. Even better to get and work it. But you may not know anything of that sort. So why waste your time writing your post.
Parent - By Chris2626 (***) Date 01-18-2011 03:32
he will find what he's looking for, I've find them
Parent - By dogweld (***) Date 01-19-2011 18:45
I post this to find me a machine that I can go through ,if it need's shunt coils, I can install them ,I don't like getting a machine that I have to overhaul the motor , anything in the generator I can repair in my shop,P.C.board what ever It need I can do ,  ,I do not do work for other people I just work on my on machine's ,I run a welding rig for 37 years ,this is a hoppy , it has it reward's ,
Parent - - By JeremyW83 (***) Date 01-18-2011 01:42
http://dallas.craigslist.org/dal/grd/2095446457.html

Found this on craigslist for dallas.  Not sure what condidtion it is in but might be a run project.
Parent - By dogweld (***) Date 01-18-2011 05:13 Edited 01-18-2011 05:21
some time it take a few week but I allways find one I did good last year ,I rebuilt 11 machines and sold everyone of them ,I don't do work for other ,I buy my own and rebuild them and sale them.here one I did in 12 10 2010 . I rebuilt all that need to be done ,run like a new one ,when you retried like I have I hope you can enjoy bring this old machines back to LIFE ..
Attachment: sa-200trailer005.jpg (0B)
Attachment: sa-200trailer007.jpg (0B)
Parent - By dogweld (***) Date 01-18-2011 23:23
I have never seen a sa-200 look like that
Parent - - By lucky1 (**) Date 01-18-2011 14:21
i have a shorthood if your interested. 1800.00 running but smokes a bit. welds good. eastern nm.
Parent - - By dogweld (***) Date 01-18-2011 23:24
thank but that a little far away ,
Parent - - By dogweld (***) Date 01-19-2011 04:15
are there any welding machines in central or east texas -cost alot of gas to look at JUNK still looking
Parent - By Tyler1970 (***) Date 01-19-2011 13:36
I would meet you half way when you are interested
Parent - By lucky1 (**) Date 01-19-2011 14:54
whare at in tx? i have a frend that is working in del rio,mayby if he comes home i can beg him into taking
n down there so you can look at. i know its not a red pannell but  its somthing you could play with if you are intrested.
- By dogweld (***) Date 01-19-2011 17:28 Edited 01-19-2011 18:47
I found a 66 red face in athen ,tx  thank to all  I payed  $1,400.00 ,need shunt coil's
- By BKinBA (**) Date 01-20-2011 03:26
Sent you a pm dogweld.
Up Topic Welders and Inspectors / Welding Equipment Classifieds / looking for a sa-200

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill