I bought this program when it was cheap, we use the sh** out of it, it will pay for itself especially when doing the big bore laterals and saddles.
it also lays other pipe penetration patterns as well, right now we are doing a 16" header with 12" branches where saddles have to be off center 1" it will do that and all different angles.
We have a large plotter so we can plot full size templates, if you do a lot of branch work I highly recommend it. It lends itself to a fab shop environment where you have plotters and printers. With printers you have to do some cutting and taping to make the larger templates.
PI