Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welders and Inspectors / Welding Equipment Classifieds / 98 Dodge Ram 3500 12 valve cummins w/19.5 wheels (FL)
- By scruboak (**) Date 12-13-2011 00:38 Edited 08-05-2012 01:29
Truck is a Fl truck, No Rust on cab and underside! 184,000 original miles. In the last couple months i installed a new Diamond Eye 4" turbo back exhaust system,BHAF,Front Full bumper & bull bar replacement bumper that is rhino lined, New paint, New headliner, New AC blower,smoke cab roof lights. The truck is a sought after Manual Transmission & floor shift 4x4 lever and comes with the rubber floors & vinyl seats. The driver seat & Dash could be repaired were they all tear/crack if it bothers you. The trucks runs excellent and fires up first crank! I love the truck & would drive it anywhere. The 8' bed was custom built when the truck was new and was custom built at a truck body shop and is a nice heavy built one, no homemade job here! Only rust on truck is on the bed Headache Rack. $11,900 with the wheel Tire combo on it or 10,000 with stock 16" wheels & tires.
Attachment: IMG_2475.jpg (189k)
Attachment: IMG_0016.jpg (327k)
- - By high_flex (**) Date 12-13-2011 13:12
Where are you located?
Parent - By scruboak (**) Date 12-13-2011 20:50
Jacksonville,FL
- - By high_flex (**) Date 12-14-2011 01:13
Do you have a number? My brother is intersted.

thanks.

He stays in Deland
Parent - - By scruboak (**) Date 12-14-2011 21:08
I'll send you a pm
Parent - - By Cumminsguy71 (*****) Date 12-15-2011 05:18
LMC Truck has a replacement dash(top) and bezel that a lot of guys are saying is an excellent, well fit product.
Parent - - By scruboak (**) Date 12-15-2011 11:14
Thanks cumminsguy, I have been wanting to find a nice replacement for a while. DO you have a link for it?
Parent - - By Cumminsguy71 (*****) Date 12-15-2011 17:04
Here ya go,

http://www.lmctruck.com/icatalog/de/full.aspx?Page=93

I have not put one on mine yet but I have seen a bunch of guys who have and they have all said the LMC part is excellent, about $200 and pretty easy to install.
Parent - - By scruboak (**) Date 12-15-2011 17:57
Thanks, are they full replacement or just covers?
Parent - - By Cumminsguy71 (*****) Date 12-15-2011 18:01
Full replacements, here's a link for a guy who just did one on his truck with pictures,

http://www.dieseltruckresource.com/dev/dash-repair-walk-through-pics-t297028.html
Parent - - By scruboak (**) Date 12-15-2011 21:30 Edited 03-13-2012 01:41
ok Thanks for he info
Parent - - By Cumminsguy71 (*****) Date 12-15-2011 23:14
If I had extra truck to run I'd like to pick up a 450 or 500 body without engine and plunk the Cummins down in it, but suppose that project would be sitting next to the truck bed I can't seem to work on!
Parent - - By scruboak (**) Date 12-15-2011 23:20 Edited 03-09-2012 22:18
Updated trades!
Parent - - By scruboak (**) Date 03-09-2012 22:19
still have the truck, This is a turn key truck.
Parent - - By high_flex (**) Date 03-12-2012 12:08
How are the ball joints, lift pump, injectors etc...?

thanks.
Parent - By scruboak (**) Date 03-12-2012 21:07
everythings stock you mentioned, no problems
- By scruboak (**) Date 07-28-2012 22:39
Still for Sale!
Up Topic Welders and Inspectors / Welding Equipment Classifieds / 98 Dodge Ram 3500 12 valve cummins w/19.5 wheels (FL)

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill