Sorry to hear about the family member, always a tough one there. If I go I'll try to make some comments on what it's about. Best regards, Allan
Hello again Blaster, got interrupted while I was composing the last reply, so back again now. We have 2 of the TA 320's with the smart guns, they are really nice combinations. Haven't run them as much as we would like to yet, but, that will change soon I am sure. We have also got one of the Miller Invision 352 MPa's w/the D74 MPa feeder- Alumapro gun on one side and the other side outfitted with a standard gun. In our last round of technological upgrades we put 8 XMT 350 MPa's w/ the S74 MPa feeders into place. All of these systems are capable of aluminum: twin-pulse, pulse on pulse, profile pulse or whatever the particular manufacturer is calling their aluminum wizardry. Once we learn some of the ins-and-outs of these they will put to much more use. Of course we still have a 30A spoolgun and an XRA push-pull set-up, either one of these can be outfitted with an Optima pulse pendant if so desired. So as aluminum joining challenges become more prevalent in our area we plan to address the needs as required. Best regards, Allan