Not logged inAmerican Welding Society Forum
My company is looking for a Technical Specialist for permanent hire. This is a salaried position, pay ranges from $68,000 to $145,000. As the Technical Specialist (Welding Engineer), this individual will work as a company expert in the area of welding, fabrication, materials and nondestructive testing. They will support the Welding Programs daily activities and provide multiple plant organizations welding engineering and nondestructive consulting services and support. Candidate must have over 3 years welding experience and current CWI certification.
I need guidance for interpreting the requirements of the standard AWS D 1.1 sec 7. I am referring to fig. 2 clause 7.3.2.
How we can measure elongation and yield stress at 0.2% with this test.
Standard also specifies that the tensile test to be carried out as per ASTM A 370. In this case there is NO ISSUE.
Do they mean both tests are to be done? Which test will be decisive?
Please help me to clear my confusion.
Thanks
Jayant Pavnaskar
You are aware this is for stud welding?
I have a 1999 Miller Bobcat 225NT gas power welder. I want to put a foot pedal on this machine. My question is: Can I adapt a foot pedal (7 pin) to this welder?
Looks like we have a bunch of newbies and spammers hijacking this poor guys thread about a job opportunity.
Too bad. It isn't really a difficult forum to understand.
Start your own thread to ask a question or start a topic.
I've got holes in my socks. Does anyone know what color thread I should use to fix the curtains?
Al
You'll need 3 pizzas to stop up the hole in your boat.
Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill