American Welding Society Forum
Required help on the below mentioned points:
1. AWS reference required for the Bunker to Hopper Plate Welding joint at 120deg
2. Is Butt Weld possible ?
Please refer the attached picture for detail.
Prefabricate a clip with CJP and bolt to web :)
Thanks for your response..
Can you please elaborate with a hand sketch..
Is that 12° or 120°?
The picture makes it look like the member that is welding to the web of the girder is less than 90°.
This would not be considered a butt weld, but rather a skewed T joint. The plate is welded to the web at a skewed angle.
Its 120 degree.
Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill