NEED HELP

By testweldguy (**)

Date 04-08-2005 06:47

I have heard that some models of pow-con stick welders have a shock hazard... so be careful...

By Bill Mc (**)

Date 04-08-2005 18:30

I have a PowCon 300SS. It can be run on either three phase, or single phase (220). I have the manual that explains the procedure for changing the input current.

I have only run it on 460v Three Phase.

If the 300SS manual will help, reply with a fax number here and I'll send you the pages you will need. There are some internal "voltage change-over procedures" to follow.

FYI: The manual does recommend a 60amp fuse for 230v single phase, and a 30amp fuse for 460 three phase.

By RODTESTER Date 04-09-2005 01:56

THANK YOU I WILL GIVE YOU THE FAX NUMBER ON MONDAY WHEN I GET BACK TO WORK.

By Bill Mc (**)

Date 04-13-2005 14:59

FAX #?

By Bill Mc (**)

Date 04-29-2005 20:59

still need that copy? Need a fax number-