Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welders and Inspectors / Welding Equipment Classifieds / F162 sa200 for sale
- - By aabric Date 12-30-2006 03:18 Edited 01-07-2007 00:24
Runs and welds great, has knock in engine. I am unsure what the knock is I have removed the pan and checked the rods. Crank and rods are all fine. Also not sure of year. Engine has knocked for about 2 years. Needs doors and the timing chain cover leaks oil. $1,800.00. This machine also comes with new 50' stinger lead and 50' of ground.
Parent - - By texasrigwelder (**) Date 01-04-2007 02:06
were are u located
Parent - By aabric Date 01-05-2007 00:24
I am located in Celina Texas. 602W. Oak St - (214) 212-8273
Parent - - By Harley5150 (*) Date 01-10-2007 03:09
you had that on ebay i think.. lol

Harley
Parent - - By aabric Date 01-10-2007 15:44
Yes i did. I was not sure if I set it up right. I am trying to get some pictures of it, also not sure if it would be right to list in here should as well as ebay. Whats your thought?
Parent - By raftergwelding (*****) Date 01-12-2007 03:32
list it in both what can it hurt it's free to list it in here and if you sell it in here before ebay jus cancel the ebay auction
Parent - By rockinbwelding (*) Date 02-01-2007 03:42
i had one that did that and the bolts in the fly wheel have back out
Parent - - By raftergwelding (*****) Date 02-01-2007 12:49
you can tighten that timing gear cover and it'll stop leaking all you need is a 9/16" wrench. they are aluminum the heat makes the bolts loosen and back out. i tighten mine every oil change as for the knock it might be a timing gear but most likely the govenor
Parent - - By superwelder2007 Date 02-09-2007 04:49
How much is it ?

Peter
Parent - By raftergwelding (*****) Date 02-10-2007 03:09
how much is what
Up Topic Welders and Inspectors / Welding Equipment Classifieds / F162 sa200 for sale

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill