Hey guys, remember I was looking for a torch? Well I just got one today!! 125 and 80(I think) cu ft tanks with one heavy duty victor reg and a differant kind on the oxy. It has a Victor J100 handle and a CA1260 cutting attach and 2 cutting tips and 2 welding tips. (Not sure on the size) It has about 50ft of hose and a heating tip. (A really serious soldering torch) It also came with a cart. Tomarrow I will take some pics and post them.
Hmmm. I just got back from looking it over. The Oxy reg has a leak. There is a big bolt/knob on the end of it and I used some soapy water to test it and it blows bubbles. I tryed to tighten it, and I did but it still leaks. Any ideas?
Its the seal on the back. I called my friend last night and he said to take it apart. There was dirt or crud in there on the seal. I'll check it in a minute to see if it still leaks.
OK it still has a slow leak. I can't hear it, but when I pour some soapy water on it, I get a bubble that slowly fills up, and them slides down and pops. I'll have to find out where I can get a seal.