I have been testing out of the D1.1 for about two years now and have only been doing the 3/8 groove.  Most of our conrtactors are only interested in some kind of paperwork saying that a person can weld.  I now have a small problem.  I need to figure out what I need to do with 321 stainless and a 347-16 electode.  I dont always have access to any material that I need and I have also not ever done anything like this.  The paperwork was already in place when I started doing the testing for D1.1.  I know that there is a procedure out there somewhere.  For the test do I need to use 321 or will any stainless in that class B work.
Any help would be greatly appreciated!!!