Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welders and Inspectors / Welding Equipment Classifieds / i found a welder
- - By hottrod1982 (*) Date 11-18-2007 03:31
i just wanted to thank everyone that was trying to help me find a welder me and my dad found one it is a 66 sa 200 1550 rpm
Parent - - By hottrod1982 (*) Date 11-18-2007 03:34
i still need a few parts. i need the heat exchange tube the cover that goes on the hood over the radiator cap and bothe the side cover decals that say lincoln
Parent - - By shorthood2006 (****) Date 11-18-2007 14:31
i will help you with finding your parts, so will ksellon on this site.
Parent - - By hottrod1982 (*) Date 11-19-2007 02:25
i thank yall verry much there is another tube i need but i dont know what it is called it is suspossed to go on top of the the exaust manifold then in to the air cleaner to warm the fuel up in the winter time
Parent - - By KSellon (****) Date 11-19-2007 15:31
Heater tube S8626 , heater tube hose S8688, heater tube strap T9486, Lincoln decals S11893-4.

S8626 OEM new obsolete
S8688 $11.00
T9486 $14.00
S11893-4 $3.00

The radiator cap cover is no available as a seperate part on the SA200's. However it is on the Classic 300's. I haven't had the time to see if it is one in the same.
Parent - By shorthood2006 (****) Date 11-20-2007 00:28
kay has all the parts you will need at billswelderrepair.com
Parent - - By hottrod1982 (*) Date 11-21-2007 02:09
how much would it be for the whole radiator cover.what do i need to do to get those parts from you
Parent - By KSellon (****) Date 11-21-2007 15:32 Edited 11-21-2007 15:36
TS-
  Are you speaking of the parts listed above? Just went to Lincolns website, the only part available for the heat riser tube assembly is the strap. What a pain. A gentleman by the name of Wayne from Pine Hurst Texas contacted me, he has a large supply of take off parts from these machines. Call him at 281-642-7706 evenings and weekends.

Shad had a take off radiator shroud. The radiator cap cover from a Classic 300 will work on the SA-200. You have to do a minor amount of modification (weld on) Here is a link to the Classic breakdown. Go to the parts page, radiator section and look at the cap cover.  http://www.mylincolnelectric.com/Catalog/operatorsmanualdatasheet.aspx?p=33994

I will post pics of the OEM heater riser assembly parts, so that you can fabricate your own.

Is your code# 6073? Here is the parts and owners manuals: You will see that Shads parts from his code number will  match the parts you are looking for. http://www.mylincolnelectric.com/Catalog/operatorsmanualdatasheet.aspx?p=29145
Parent - By raftergwelding (*****) Date 12-08-2007 05:49
if you want mine it's 75.00 plus frieght  it is complete and no rust , holes or dents jus paint it to match your machine and ur good to go
Parent - By raftergwelding (*****) Date 12-08-2007 05:44
the rad. cap cover is on the rad. panel i have 1 if your intrested
Up Topic Welders and Inspectors / Welding Equipment Classifieds / i found a welder

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill