Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welding Industry / Inspection & Qualification / New to this board/forum
- - By DavidNMC Date 12-18-2007 18:12
Hello everyone,

I'm brand new to this forum and I did not see an "introductions" board so I decided to post my greeting here. Thanks for reading and have a great day!

Take care,
Dave
Parent - By hogan (****) Date 12-18-2007 18:55
welcome. if you choose a topic and look at the first post, this will explain things.
Parent - - By jwright650 (*****) Date 12-18-2007 19:10
Hello Dave! Welcome to the forum, thanks for introducing yourself.

Here is a link to the HELP notes at the top of the forum page. If you can't find the info you need there, ask and we'll try to help.
http://aws.org/cgi-bin/mwf/forum_help.pl
Parent - By 803056 (*****) Date 12-21-2007 01:41
Welcome aboard - Al
Parent - By ssbn727 (*****) Date 12-22-2007 02:52
"Weldcome" to the forum DavidNMC!

Respectfully,
Henry
Parent - By webbcity (***) Date 12-22-2007 05:43
hi david , welcome to the forum . i hope you are able to participate as others have they have helped many of us . we all can use good advice and get it here . whats your weather like , ours just warmed up from -10 below zero to 9.3 degrees , and snowing litely . good luck . willie
Parent - By rlharv2 Date 01-30-2008 01:41
Hello everyone, I to am new to the forum. I am preparing to prepare to take the CWI test (in December 08) and relized that the needed books might not be readily available in my office. ie D1.1,etc. Specifically, which code book are being used. Any info would be very much appreciated. Thanks, Rick Harvey
Up Topic Welding Industry / Inspection & Qualification / New to this board/forum

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill