Not logged in
American Welding Society Forum
Forum
AWS Website
Help
Search
Login
Topic
American Welding Society Services
/
Certifications
/ Deformed Bar
By
Leadburner
Date
03-06-2008 20:53
Can anyone tell me the AWS code for bending deformed bar. I've got A 496 but it says nothing about bending and stresses.
By
803056
Date
03-06-2008 20:59
AWS only addresses welding rebar, not fabricating rebar.
Al
By
Leadburner
Date
03-06-2008 21:29
Hey, I found it!
D1.1 Structural Welding Code 7.6.6.1
The bar can be bent 90 degrees from it's original axis over a pin that is
4 times it's dia.
By
hogan
Date
03-06-2008 22:25
if your sure
By
MBSims
Date
03-06-2008 23:19
You lost me on that one. 7.6.6.1 addresses bend testing of studs, not deformed bars.
By
johnnyh
Date
03-06-2008 23:28
Slow your roll......get it?
By
swnorris
Date
03-07-2008 14:54
A496 Minimum bend diameters:
DBA dia. Min. bend dia.
1/2" 3"
5/8" 3 3/4"
3/4" 4 1/2"
7/8" 5 1/4"
1" 6"
DBA's should always be bent before welding. The weld should not be closer than two times the DBA diameter from the bend.
Topic
American Welding Society Services
/
Certifications
/ Deformed Bar
Forum
AWS.org
- Forum News & Help
American Welding Society Services
- Certifications
- Conferences & Shows
- Technical Standards & Publications
- AWS Learning & Education
Welding Industry
- General Welding Discussion
- Technical Discussions
- Inspection & Qualification
- Processes
- Welding Fundamentals
- ASME Codes
- Welding Safety
- Metallurgy
- Welding Documents & Downloads
Welders and Inspectors
- Education & Training
- Welding Equipment Classifieds
Sections
- Section 7: San Francisco
- Section 32: Rochester
- Section 39: Colorado
- Section 41: Puget Sound Olympic
- Section 55: Arizona
- Section 81: Nebraska
- Section 110: North Florida
- Section 112: Florida West Coast
- Section 135: Nevada
- Section 156: Inland Empire
Chit-Chat & Non-Welding Discussion
- Off-Topic Bar and Grill
Powered by
mwForum
2.29.2 © 1999-2013 Markus Wichitill