![](/mwf/attachments//avatars/19261-6136.jpg)
Certified Machine & Design, Inc
3000# Manufacturing Positioner
http://billswelderrepair.com/sitebuilder/images/POSITIONER-2-600x450.jpghttp://billswelderrepair.com/sitebuilder/images/POSITIONER-1-600x450.jpg- Full 3000 pound capacity @ 16" from Pivot, more than other brands
- 0 to 135 degree power tilt, direct drive double reduction gear box, oversize 0.75 horsepower TEFC 115
volt motor limit switch protected
- 0 to 2 rpm infinitely variable speed gear drive table, double reduction gear box, over size 0.75
horsepower TEFC 90 volt DC motor
- Full Tapered bearing support of table with ground cable to main axle
- NEMA 4 box and sealed switches - ideal for dirty environments
- Standard 42" diameter 5/8" flat table, available square and/or slotted
- Standard 18 foot remote on-off foot switch with safety cover
- Optional fiberglass remote pendant with complete remote functions for Tilt-Flat, Forward-Reverse,
Run-Jog, Infinite Speed and Emergency stop
- Optional drive speeds available for up to 5 rpm
- Optional height adjustable centerline 30" to 42" above floor
- All top quality components available from a variety of sources - Baldor DC motors, Dayton AC motors,
KB speed controls, Telemecanique switches, all circuits fuse protected, remotes are shielded for AC
welding operations
- Solid steel construction of laser cut plate and structural steel components with powder coat finish with
zinc plated features
Lead time is 3 weeks.
$16,500.00
Call Jerry for details
405-613-8188