Lincoln 300/300 AC/DC Tig+stick welder.

Date 01-01-2012 18:20 Edited 01-02-2012 04:23

Oldie but goodie. 220 single phase. High frequency is out....it is either a cheap capacitor or the pot on the front...the coil checked good. Have burned 3/32-5/32 rods with it and it welded fine. $600. Will consider trades...good 2/0 lead, suitcase feeders...what do you got?

By Joseph P. Kane (****)

Date 01-01-2012 19:54

600 $$$ for that machine?!?!?!?! Have you changed your name to "Tommys smoking" (As in foul smelly weed) yet!?

By Tommyjoking (****)

Date 01-01-2012 20:37

What Joe? A good working 1 phase tig with that amperage capacity? That model commonly sells for 800-1k in full working condition. Believe it or not. This one can be fixed for around 50 bux...maybe 200 on the outside if you take it to a shop. There ain't a dang thing wrong with old trans recifier machines...they certainly outlast the psuedo squarewave variety!

By reitenger (*)

Date 01-02-2012 01:19

Location? It is only a good deal if it is close enough to buy

By Tommyjoking (****)

Date 01-02-2012 01:26

Beebe AR. Bout 30 miles north of Little Rock.

By reitenger (*)

Date 01-02-2012 02:43

that is almost funny. I am from Batesville originally, but stuck in Denver at the moment. Good luck on the sale.

By Tommyjoking (****)

Date 01-02-2012 04:05

Thanks. Been to Denver once on a short vacation in the summer. Thought it was a nice place. Batesville probably has not changed a lot since you left it.