Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Login
Up Topic Welders and Inspectors / Welding Equipment Classifieds / cap for oil bath
- - By upten (*) Date 03-01-2009 00:29
looking for a cap for a oil bath assembly on a sa-200
Parent - - By raftergwelding (*****) Date 03-01-2009 07:55
you mean the bottom cup?
Parent - - By upten (*) Date 03-01-2009 14:27
i need the cup and the clamp
Parent - - By raftergwelding (*****) Date 03-01-2009 18:00
those are rallu super hard to find the only way to get 1 from lincoln is to but the whole air cleaner
Parent - - By chris2698 (****) Date 03-01-2009 21:03
currious of how much is the old style oil bath air cleaners from Lincoln??
Parent - - By raftergwelding (*****) Date 03-02-2009 00:24
i think around 150 ask kaye
Parent - - By chris2698 (****) Date 03-02-2009 01:32
yeah I seen that she is selling them forthat. I thought you were meaning you can get it Brand NEW from lincoln
Parent - By shorthood2006 (****) Date 03-02-2009 03:06
call highway 60.......580 767 0768. they have em.
Parent - - By raftergwelding (*****) Date 03-02-2009 07:19
you can get them new from lincoln but i think they are around 200-250
Parent - - By chris2698 (****) Date 03-02-2009 07:27
dam I guess I better keep mine then if there going for that much. they seem to do a pretty good job but still sometimes smell like a little gas when I chage the oil in it
Parent - - By raftergwelding (*****) Date 03-02-2009 16:07
you carb is leaking fuel back into the air cleaner sounds like the float is out of adjustment mine does it too just change it about every 50 hrs and it should be ok i do it when i remember lol
Parent - - By chris2698 (****) Date 03-02-2009 20:16
is it hard to change the float? I usually run the gass outta the motor when I am done useing it because sometimes it will sit a couple of weeks before  iuse it again
Parent - - By raftergwelding (*****) Date 03-03-2009 00:14
dont change it adjust it did you put a gasket between the manifold and the carb when you put it on. those crabs are easy to work on just remember what came from where there arent that many parts really
Parent - By chris2698 (****) Date 03-03-2009 10:57
yeah I got a gasket on it
Parent - By FixaLinc (****) Date 03-06-2009 20:44
Someone give me measurements on them as can probably get them or have them already in the aftermarket tractor parts they have reproduced a few oil cups might be same size. 
Parent - By KSellon (****) Date 03-05-2009 22:16
I have one if you need it!!!!
Parent - By righand Date 03-03-2009 00:26
I have the whole oil bath assembly let me know if you still need it 573-776-3056 or email at prattswelding@aol.com
Parent - - By KSellon (****) Date 03-10-2009 20:54
I need your address...
Parent - By upten (*) Date 03-27-2009 22:35
thank you kay. it fit perfect
Up Topic Welders and Inspectors / Welding Equipment Classifieds / cap for oil bath

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill