American Welding Society Forum
am planing a wps quaification in 3G plate position SMAW process , CJP ..But when i noticed Table 4.1 (WPS Qualification) if qualification position is in 3G then the production plate welding qualified is Vertical only , so my doubt is that if we need to weld 2G position in production whether we need to qualify another PQR in 2g position???? because position is shown as essential variable in Table 4.5 sl 27 as per AWS D1.1,2010
Awaiting the valuable comments,
I agree with your conclusion. If you have production requirements that include grooves welded in the horizontal position, the WPS must be supported by a PQR that was welding in the horizontal position.
I suggest considering changing the method of welding so that the WPS meets all the conditions of prequalification and side step the need for qualifying the WPS in accordance with clause 4. There are many instances where modifying the process slightly allows the contractor to develop prequalified WPS and eliminate the time consuming and expensive process of qualifying the WPSs by testing.
Best regards - Al
Thank you AL...
Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill